Description
Industrial Grade Multi Walled Carbon Nanotubes 10-20nm, >97 wt%
Industrial grade multi walled carbon nanotube (MWCNT) powder produced by catalytic chemical vapor deposition (CCVD) with an outer diameter of 10-20nm and a length of 20-50um. BET specific surface area is 230-270 m2/g and purity is greater than 97 wt%. This product is engineered as a cost-effective conductive additive for high volume applications including lithium-ion battery electrode slurries, supercapacitor electrodes, polymer composites and conductive/antistatic formulations. Suitable for preparation of conductive MWCNT pastes and slurries, coatings and inks. Surfactants are used to stabilize dispersions in DI Water or other aqueous solvent mixtures. The most common surfactants used are PVP, SDS, or SDBS.
Industrial Grade Multi Walled Carbon Nanotubes 10-20nm Specifications
Appearance: Black powder
Outer Diameter: 10-20nm (TEM)
Length: 20-50um (SEM)
Purity: >97 wt%
Ash Content: ≤3 wt% (muffle furnace, 900 C, 4 h)
Specific Surface Area (BET): 230-270 m2/g
Bulk Density: 0.063 g/cm3
Tapped Density: 0.05-0.08 g/cm3
Powder Resistivity: <1000 uOhm·m (four-probe, compressed)
Fe: ≤5000 ppm
Cr: ≤15 ppm
Ni: ≤15 ppm
Cu: ≤15 ppm
Zn: ≤50 ppm
Co: ≤330 ppm
Values shown are representative of typical production. Outer diameter by TEM; length by SEM; specific surface area by nitrogen adsorption (BET); powder resistivity by four-probe on a compressed sample; metals by ICP-OES on the post-ash residue.
Supplied in 4kg sealed bags; 20kg and 100kg pack pricing on request.
Download the Industrial Grade MWCNT 10-20nm TDS (PDF) for full specifications.





Reviews
There are no reviews yet.